Coaxial

Cryo Attenuator

With low thermal noise characteristics and minimal self-heating, achieving temperature faster.

Horn Antennas

High Current Bias Tees

Quality and performance in a strandard three-port network for high current applications

Reflector Antennas

Octave Horn Antennas

Multi Octave Horn Antennas

Spiral Antennas

Microstrip Antennas

Log Periodic Antennas

Discone-type Antennas

Bi-Conical Antennas

Directional Finding Antennas

dbDirect Broadband Antennas

Horn Antennas

NW-MI Series

An economical and rugged manual noise instrument NW-MI series

NW-ATE Series

An economical and rugged noise instrument

RCIED Jamming Antennas

Monitoring Antennas

High Power Transmit

Log Periodic Dipole Arrays (LPDA)

Switched Beam Antennas (SBA)

Low Phase Noise Amplifiers

Coaxial Terminations

0 to 40GHz Termination，Power handling from 0.5 to 2000watts,

Powerfilm™ Chip Attenuators

RF Attenuators Up to 250 Watts, Up to 40 GHz

Powerfilm™ Flange Attenuators

Up to 250 Watts, Up to 4 GHz. Designed tovreduce power of the RF signal while generating only a small reflection even under maximum power conditions.

Pill Terminations & Attenuators

115A – 119A Manual Step Attenuators

A series of broadband, step manual attenuators in a right-angle drive configuration.

940 Continuously Variable Attenuators

Wide variable attenuation range with approximately linear calibrated dialm and rugged design.

General Purpose Bias Tees

Available in SMA, N-Type, and 7/16 DIN connector styles.

Pulsed Models Bias Tees

Manufactured for maximum performance and minimal disruption.

75 Ohm Bias Tees

Quality and performance in a standard three-port network specific for 75 Ohm applications

General Purpose DC Block

DC block have a capacitors which prevent the flow of audio and direct current (DC) frequencies.

High Voltage DC Blocks

DC blocks have a capacitor in-series with the center conductor which prevents the flow of audio and direct current (DC) frequencies.

Broadband DC Blocks

Outer DC blocks have a capacitor in-series with the outer conductor and the inner/outer types have capacitors in-series.

RF Cavity Filters

Tunable Cavity Band Reject Filters optimized performance for multiple industries, including harsh environments. 0.03 to 40 GHz

Extended Range Filters (ERF)

Combine a highly tunable interface with consistent power handling inside a modest package, fulfilling the need for a small and rugged RF filtering device.

IMF™ Filters

Integrated Microwave Filters (IMF™ Filters) Ultra-fast tuning speeds into pint-sized packaging, 1.5 GHz to 24 GHz

MAXI-POLE®

Tunable filters Band Pass Filters. Frequency Range: HF, VHF, UHF band in bandpass and band reject or notch configurations. Bandwidth: 1.9%-5.5%

MEGA-POLE®

Covers the standard frequency bands within the 30 to 450 MHz range. Designed for rugged military environments per MIL-STD-810

MINI-POLE®

Tunable filters is optimized for size, RF power handling, low distortion, and exceptional selectivity. 1.5 MHz to 700 MHz

NANO-POLE® Tunable Filters

Designed for optimal size, DC consumption, RF power handling, insertion loss, signal purity and linearity.

POWER-POLE®

Tunable Band Pass Filters. Bandwidth: 1.8%-9.5%

Ceramic Fixed Bandpass Filters

Offered in dielectric and connectorized forms, delivering superior high Q performance in a smaller sized package. Frequency Range: 0.27 to 3 GHz

Combline Filters

Combline Fixed Band Reject Filters offers high Q performance in a ruggedly designed package. Frequency Range: 500 MHz to 40 GHz

RF Helical Filters

Ideal for applications utilizing a narrow frequency range and where low insertion loss and impedance is required. 45 MHz to 3 GHz

Interdigital Filters

Frequency Range: 0.5 to 50 GHz. For variety of applications, including harsh military environments. UHF in Interdigital Bandpass Filter designs.

Lumped Element

Passive devices, smaller than the operating wavelength, to permit a wider bandwidth within compact packaging. 0.5 MHz to 10 GHz

Mixed Technologies Filters

By mixing technologies, including Cavity, Suspended Substrate, Ceramic, Lumped Components, Combline and Interdigital, we can more effectively tailor the filter design to individual applications.

Quad Flat No-Lead Package Filter (QFN)

Fulfills the current market demand for a low cost, high performance bandpass filter, Available as a 10mm unit. Frequency Range: 1.5 GHz to 24 GHz

Suspended Substrate Filters

Combine high Q factor and low-loss performance into a durable and temperature stable small package.

Thin Film Filters

Excellent temperature stability, low loss and consistent performance at a lower cost. 3 GHz to 50 GHz

Tubular Filters

Frequency Range: 100 MHz to 20,000 MHz. Bandwidth: 0.2% to 50%

Fixed Low Pass Filters

Available as narrow band filters or wideband filters, supporting bandwidths from .1% to 200%, in configurations of 2 to 18 sections

Low Pass Filters

Eliminate unwanted interference from adjacent channels by passing signals lower than a specified frequency and attenuating those in a higher range.

RF Multiplexers

Combine multiple filters to a common port to create a multi-channel module. Filters can be customized to meet lowpass, highpass, bandpass, or bandstop requirements.

RF Fixed Attenuators

DC-67GHz Fixed Attenuator，Power handling from 0.5 to 2000watts, attenuation range 0 to 80dB,

Digital Control Attenuator

up to 40GHz, attenuation from 0 to 60dB,

2-way Power Divider

From 0.5 to 40GHz, SMA,N,2.92mm conntector are avaliable, frequency band can be customized,

4-way Power Divider

From 500MHz-40GHz, Conntector SMA,N,2 92mm are avaliable, frequency band can be customized

8-way Power Divider

From 0.5 to 40GHz, conntector SMA,N,2.92mm are avaliable, frequency band can be customized,

3,12,16, 32-way Power Dividers

ultiway power dividers(Combiner), include 3-way,12-way,16-Way and 32-way Power divider(Combiner). Conntector SMA,N are avaliable

Lumped Power Dividers

2~16w. Freq. Range from 1MHz to 6000MHz, Coaxial, surface mount, plug-in type available,

Resistive Power Dividers

Resistive Power Divider, from DC to 18GHz.

90º Hybrid Couplers

up to 40GHz, connector SMA,N,2 92mm are avaliable.

180º Hybrid Couplers

Up to 40GHz, connector SMA,N,2 92mm are avaliable

Coaxial Isolators

Connector SMA, N, BNC, 2 92mm or Drop-in are avaliable. Customized frequency and optimized specifications available.

Coaxial Circulators

Connector SMA, N, BNC, 2 92mm or Drop-in are avaliable. Customized frequency and optimized specifications available.

Reflective PIN Diode Switches

Reflective Type Switches, 2 to 16way, controlled by TTL, minimun isolation 60dB.

Absorptive PIN Diode Switches

Absorptive Type Switches, 2 to 16way, controlled by TTL, minimun isolation 60dB Customized frequency and optimized specifications available.

High Power PIN Diode Switches

2 to 16way, controlled by TTL, Customized frequency and optimized specifications available.

Switched Filter Banks

10 channels, 8-18GHz, can be customized according to customer requriement

Digital Phase Shifters

Octave & Half Octave Amplifiers

Radar & Communication Amplifiers

Broadband and Multi-Octave Amplifiers

Ultra Broadband Amplifiers

Low Noise Amplifiers

Ultra Low Noise Amplifiers

Limiting Amplifiers

Designed to accept a wide range of input power levels while responding with a limited range of output power levels.

KA Band Amplifiers

Radial Power Combiners and Dividers

Radar Rotary Joints for Air Traffic Control

Standard and custom rotary joint designs available for Primary Surveillance Radar (L and S-Band PSR) and Secondary Surveillance Radar (SSR)

Space-Qualified Rotary Joints

Space rotary joint designs are qualified to: NASA & ESA Standards as well other international Space Agency Standards

Rotary Joints for Commercial Applications

Satcom RF rotary joints designs in a single, dual and multi-channel configurations with coaxial and/or waveguide interfaces.

SPDT Coaxial Switches

Maximum VSWR ranging from 1.1 to 1.95 with minimum isolation ranges from 55 dB to 90 dB and a max insertion loss from .1 dB to .8 dB,

Coaxial DPDT Switches

Double pole double throw with SMA or 2.9mm connectors. Failsafe or latching actuator. DC - 40 GHz. Frequency Range: DC - 40 GHz

SPnT Coaxial Switches

Single Pole Multiple Throw

DPDT High Power Coaxial Switches

High Power Coax DPDT Switch frequency: Coaxial Switches route RF signals over a broad bandwidth from DC - 12.4 GHz

High Power Coax SPDT Switches

High Power Coax SPDT Switch frequency: Coaxial Switches route RF signals over a broad bandwidth from DC - 12.4 GHz

High Power Coax SPnT Switches

High Power SP3T, SP4T and SP6T Coaxial series

High Repeatability SPnT Switches

The Reliant Switch™ series has a switching time of 15 ms and it is offered with a nominal power supply voltages of +12Vdc or +24Vdc.

High Repeatability SPDT Switches

R401 Series Routes signal to one of two outputs. Great for ATE systems. SMA connectors. 10M Cycle Life, great insertion loss repeatability, low VSWR, high isolation

Seamless Semi-Rigid Flange to Flange Adapter

A low loss, hand formable waveguide section suitable for millimeter wave applications. 50 GHz to 330 GHz

PIN Diode Switches | HSW & HSWM Series

Digital Attenuator | HDA040-069 Series

Range from DC to 40 GHz in 6-bit operation. Attenuation bit values are 0.5 dB (LSB)

Crossbar Switch Matrix | CB Series

CB Series conveniently facilitates environments containing multiple test setups, eliminating the need to connect and disconnect devices.

Multiple Switch

MS-series is a switch matrix solution offering user flexibility in instances where multiple switches are required.

Non-blocking FIFO systems

Full Fan-In Fan-Out (FIFO) systems are non-blocking devices, allowing simultaneous connections between any input to any output.

Switched Matrix Multiplexer

Electomechanical multiplexer system with the capability to switch one input to as many as 143 outputs.

Solid State Switch Matrices

Reliably routing the input signal to any output port, Solid State Matrices are applicable for complex applications where multiple I/O signals increase switching complexity.